Jeep JL Coil Spring Base 3.5 Inch Lift Kit and 9550 VSS Twin Tube Shocks For 10-Pres Wrangler JL 4 Door TeraFlex

1 492.00

En stock
UGS : TERA 1356050 Catégories : , , Étiquettes : , , ,
Partager:

Description

The ultra-simple TeraFlex JL 4 Door 3.5 inch Coil Spring Base Lift Kit w/ 9550 VSS Twin-Tube Shocks includes just the basic lift components only and doesn’t have the drivability of a full suspension system. Requires front control arm Sport Brackets, or longer front lower control arms, or adjustable control arms, and/or an adjustable front track bar to correct suspension geometry.

We recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks. These are the only shock absorbers engineered to work with TeraFlex lift coil springs to improve both compression and rebound for optimal vehicle stability. 3.5 inch Coil Spring Base Lift Kits are offered with TeraFlex 9550 VSS Twin-Tube Shocks or without shock absorbers. Falcon Performance Shocks are available separately.
Specs:

  • JL Wrangler Unlimited (4 Door)
  • Lift Height: 3.5 inch

Max Tire Diameter:

  • Sport/Sahara Fenders: 35 inch (w/ 3 inch front and 2.5 inch rear bump stops)
  • Rubicon Fenders: 35 inch (w/ 2 inch front and 2 inch rear bump stops)
  • Rubicon Fenders: 37 inch (w/ 2.5 inch front and 3 inch rear bump stops)

Includes:

  • 3.5 inch Lift Coil Springs (Front: part number 1863000 and Rear: part number 1863100)
  • Front Track Bar Bracket (2.5-3.5 inch Lift) (part number 1953250)
  • Rear Track Bar Bracket (2.5-4.5 inch Lift) (part number 1953600)
  • 2 inch Bump Stop Strike Pad Extension Kit (part number 1959500)
  • 0.5 inch Bump Stop Strike Pad Shim Kit (part number 1959300)
  • 10.75 inch Front Sway Bar Link Kit (part number 744500)
  • 11.5 inch Rear Sway Bar Link Kit
  • TeraFlex 9550 VSS Twin-Tube Shocks (3.5 inch Lift) (part number 1545350)
  • All necessary hardware

Note(s):

  • Caster correction required – Not Included. Proper suspension geometry ensures all stability controls function w/in factory parameters. The following components are recommended to optimize caster and pinion angles and restore factory steering and suspension geometry: Front Lower Sport Control Arm Kit (part number 1253000), or Front Control Arm Sport Brackets (part number 1938125), or adjustable 8-Arm Alpine IR Short Control Arm Kit (Alpine: part number 1416610 / Alpine IR: 1416510), or adjustable 8-Arm Alpine IR Long Control Arm and Bracket Kit (Alpine: part number 1316010 / Alpine IR: 1310510), and/or adjustable Alpine IR Front Track Bar (part number 1753420).
  • Requires aftermarket wheels w/ 4.75 inch backspacing or less – or Offset Wheel Adapters (part number 1057000) for stock wheels – Not Included.
  • Models with plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35 inch or larger tires.
  • Sport/Sahara Fenders require 3 inch front and 2.5 inch rear bump stop extensions and shims (Included) in order to fit 35 inch tires.
  • Rubicon Fenders require 2 inch front and 2 inch rear bump stop extensions (Included) in order to fit 35 inch tires.
  • Rubicon Fenders require 2.5 inch front and 3 inch rear bump stop extensions and shims (Included) in order to fit 37 inch tires.
  • Requires longer shocks (Not Included in base kit) – we recommend Falcon Performance SP2 Mode Adjust Shocks or TeraFlex 9550 VSS Twin-Tube Shocks.
  • Install Time: 5 Hours

Informations complémentaires

Poids 42.18 kg
Dimensions 60.96 × 35.56 × 43.18 cm
Rechercher: